Basic Info.
Model NO.
Spreading Wings S1000+
Certification
ISO9001, FCC, RoHS, CE
Operating Radius
Medium Range
Structure
Unmanned Rotorcraft
Transport Package
All New
Specification
Host and Flight controller and cradle head
Product Description
Features:LARGE CARRYING CAPACITY, STRONG AND STABLE
Free yourself from weight limits and fly with heavy DSLR cameras such as the 5D Mark III with the advanced eight-rotor propulsion system of the S1000+. The S1000+'s arms and landing gear are made of sturdy carbon fiber, giving remarkable stability and strength. You're flying in a variety of flight conditions with confidence, knowing your gear is safe.HIGHLY PORTABLE, WITH FOLDABLE ARMS
With arms that fold in to save space, the S1000+ is built to be taken wherever you need to go. Then when you want to fly, you are ready to start shooting in just a few minutes.REMOVABLE UPPER CENTER BOARD
The upper center board can be removed, giving you access to the IMU. Additionally, there are eight positions reserved for your extra equipment. So installation of your main controller, iOSD, Lightbridge, or any other accessories is faster and easier than ever before.
This new center board structure is perfectly compatible with the DJI WKM and A2 flight controllers.NEW POWER DISTRIBUTION SYSTEM
A redesigned, rebuilt power distribution system improves safety and reliability. Gold-plated metal bearings with a unique screw design secure the power cords, ensuring cables will not come loose during flight and allowing easy setup.SPARKPROOF PLUG
Prevent short circuits and easily plug in your power supply with the AS150 sparkproof plug.PROFESSIONAL QUALITY
Weighing just 4.4kg, the S1000+ has a maximum takeoff weight of 11kg. This means you can easily carry most cameras and gimbals, including your 5D Mark III. Used with a 6S 15000mAh battery, it can fly for up to 15 minutes.WIDE RANGE OF SHOOTING ANGLES
Retractable landing gear and a low gimbal mounting bracket combine to enable a wide range of possible shooting angles and camera motions.COMPATIBLE WITH ZENMUSE GIMBALS
Full compatibility with DJI's entire line of Zenmuse Z15 camera gimbals, including the new Z15-5D III (HD), provides unmatched stability in flight.REDUCED VIBRATIONS, CLEARER FOOTAGE
The S1000+'s gimbal bracket is separated from the main frame by specifically designed dampers. This significantly reduces high-frequency vibrations and makes your shots clearer and sharper.GREATER POWER
A 40A electronic speed controller (ESC), our fastest available, is built in to each arm. The 4114 pro motors, high performance 1552 folding propellers, and V-type mixer design combine to give each arm of the S1000+ a maximum thrust of 2.5Kg.
Our latest motor adopts a single wire stator design, offering improved heat dissipation, better performance, and a tidier, more reliable system.INNOVATIVE ARM DESIGN
Each arm is designed with an 8° inversion and a 3° inclination, making the aircraft more stable when rolling and pitching, yet more flexible when rotating.
Technical Specifications
Spreading Wings S1000+ :
| FRAME | Diagonal Wheelbase | 1045mm |
| Frame Arm Length | 386mm |
| Frame Arm Weight(Including Motor, ESC, Propeller ) | 325g |
| Center Frame Diameter | 337mm |
| Center Frame Weight (with Landing Gear Mounting Base, Servos) | 1520g |
| Landing Gear Size | 460mm(Length)×511mm(Width)×305mm(Height) |
| MOTOR | Stator Size | 41×14mm |
| KV | 400rpm/V |
| Max Power | 500W |
| Weight(with Cooling Fan) | 158g |
| ESC | Working Current | 40A |
| Working Voltage | 6S LiPo |
| Signal Frequency | 30Hz ~ 450Hz |
| Drive PWM Frequency | 8KHz |
| Weight(with Radiators) | 35g |
| FLIGHT PARAMETERS | Takeoff Weight | 6.0Kg ~ 11.0Kg |
| Total Weight | 4.4Kg |
| Power Battery | LiPo (6S,10000mAh~20000mAh,15C(Min)) |
| Max Power Consumption | 4000W |
| Hover Power Consumption | 1500W (@9.5Kg Takeoff Weight) |
| Hover Time | 15min (@15000mAh & 9.5Kg Takeoff Weight) |
| Working Environment Temperature | -10 °C ~ +40 °C |
| FOLDABLE PROPELLER (1552/1552R) | Material | High strength performance engineered plastics |
| Size | 15×5.2inch |
| Weight | 13g |
| GAIN VALUE SETTINGS | For A2 flight controller | Basic: Roll 120%, Pitch 120%, Yaw 120% |
| Attitude: Roll 170%, Pitch 170%, Vertical 120% |
| For WooKong-M flight controller | Basic: Roll 130%, Pitch 130%, Yaw 120% |
| Attitude: Roll 180%, Pitch 180%, Vertical 120% |
A2 Flight controller:
| Peripheral | | Quad-Rotor: +4,x4; |
| Hex-Rotor +6,x6,Y6,Rev Y6; |
| Octo-Rotor +8,x8,V8 |
| 400Hz refresh frequency |
Supported Transmitter For Built-In Receiver | Futaba FASST Series and DJI DESST Series |
External Receiver Supported | Futaba S-Bus, S-Bus2, DSM2 |
| 2S ~ 6S LiPo |
| -5°C to +60°C |
Assistant Software System Requirement | Windows XP SP3 / 7 /8 (32 or 64 bit) |
Other DJI Products Supported | Z15, H3-2D, H3-3D, iOSD, 2.4G Data Link, S800 EVO, S900, S1000, S1000+, etc. |
| Flight Performance | Hovering Accuracy(In GPS Mode) | Vertical: ± 0.5m |
| Horizontal: ± 1.5m |
| < 8m/s (17.9mph/28.8km/h) |
| 150 deg/s |
| 35° |
| ±6m/s |
| Electrical & Mechanical | | MAX 5W (Typical Value: 0.3A@12.5V) |
| Built-in Receiver |
| Multiple Control Modes |
| 2-axis Gimbal Supported |
| Low Voltage Protection |
| PC & Bluetooth Ground Station |
| External Receiver Supported |
| Intelligent Orientation Control |
| Sound Alarm |
| 4 Configurable Output |
| Total Weight: <= 224g(overall) |
| Flight Controller: 54mm x 39mm x 14.9mm |
| IMU: 41.3mm x 30.5mm x 26.3mm |
| GPS-Compass Pro: 62mm (diameter) x 14.3mm |
| LED-BTU-I: 30mm x 30mm x 7.9mm |
| PMU: 39.5mm x 27.6mm x 9.8mm |
Zenmuse Z15-A7 :
| General | Built-In Functions | 1. Three Modes |
| · Orientation-locked control |
| · Non orientation-locked control |
| · FPV mode (Reset) |
| 2. Built-in independent IMU module |
| 3. DJI gimbal special servos drive module |
| 4. HDMI-HD/AV module |
| 5. Infrared remote control module |
| 6. Wireless video transmission supported |
| 7. Camera shutter/video recording control supported |
| 8. Wide range voltage input supported |
| 9. S-Bus Receiver supported |
| Peripheral | Supported Camera | Sony ILCE-7S; Sony ILCE-7R |
| Current Supported Lens | Sony FE 35 mm f2.8 ZA |
| GCU Input Power | 4S~12S LiPo (Recommend 6S if with S1000+) |
| Control Requirement | At least four spare receiver channels |
| Assistant Software System Requirement | Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit) |
| Mechanical & Electrical Characteristics | Working Current | Static current: 200 mA (@25 V) |
| Dynamic current: 400 mA (@25 V) |
| Locked-motor current: 4 A (@25 V) |
| Operating Temperature | -10°C ~ 50°C |
| Weight | 1.3 Kg |
| Dimensions | 210mmX204mmX246mm |
| GCU Weight | 63g |
| GCU Dimensions | 64.2 mm ×34.1mm ×19.5mm |
| Working Performance | Load Weight (Reference Value) | 622 g(@Sony ILCE-7S with Sony FE 35 mm f2.8 ZA, battery, lens hood and SD Card) |
| 580 g(@Sony ILCE-7R with Sony FE 35 mm f2.8 ZA, battery, lens hood and SD Card) |
| Controlled Angle Accuracy | ±0.01° |
| Maximum Controlled Rotation Speed | Pan axis: ±130°/s |
| Tilt axis: ±130°/s |
| Roll axis: ±30°/s |
| Controlled Rotation Range | Pan axis control: ±360° continuous rotation |
| Tilt axis control: +50°/-140° |
| Roll axis control: ±40° |
Packing list:Spreading Wings S1000+ × 1A2 Flight controller × 1Zenmuse Z15-A7 × 1 Base Package:
1. About us
Shenzhen Weida Trade Co. Ltd is a well-known excellent company, For a long time, we are committed to providing all kinds of auto parts and electronic products for the global customers. In recent years, with the progress of science and technology, the UAV industry is developing rapidly, the rapid emergence of a variety of UAV in the global market. Among them, DJI company's products from China has occupied the global market share of 70%, Has been favored by consumers around the world. So We carry out business cooperation with the agents of DJI Corp, began to the world's UAV distributors and UAV enthusiasts to provide DJI UAV and UAV accessories. We sell the DJI UAV and accessories are brand new genuine, 100% from DJI company's own factory production, good quality. We adhere to the "quality first, customer first, service first" business philosophy, with first-class products and services, to create greater value for our customers, we are willing to work with customers hand in hand, towards a better tomorrow.
2. Transaction details
About the price: we will give you the best price according to the quantity of your order, the greater the order, the lower the price.
Terms of payment: the first transaction, the first payment and then shipped.
In the later transaction, when you pay 50% of the payment, we will be able to ship the goods.
Payment method: L / C, T / T, Western Union
Product packing way: in the original outer packing box outer layer and then a carton packaging, better protect your products.
Transport: small orders using EMS, UPS, DHL, FedEx, TNT and other courier, large quantities of orders using air or sea.
Delivery time: shipment within one week after receipt of payment, and notify you.
Delivery time: Express delivery and air transport: after delivery a week or so the arrival,Ocean Shipping: after delivery a month or so the arrival.
Notice: If your order is worth more than $500, we will give you free shipping.
3. After sales service policy
Our after-sales service policy is the same as DJI company, you can visit the DJI company's official website (http://szweida.en.made-in-china.com) to get a detailed understanding of. If your product has a problem, you can find DJI Service Center in your country, if your country don't have the DJI company's repair center, you can couriered the products to us to deal with.
If you have any questions or suggestions about our products and price and service, please contact us as soon as possible, you can use the Email and TradeMessenger or Wechat, we will be very welcome and appreciate your patronage.
Tel: +86-0755-33558650, +86-15986683828
Address:
A901, Kangtaihe Building, No. 136 Qiaonan New District, Qiaotou Community, Fuhai St, Shenzhen, Guangdong, China
Business Type:
Trading Company
Business Range:
Auto, Motorcycle Parts & Accessories, Consumer Electronics, Electrical & Electronics, Light Industry & Daily Use, Tools & Hardware, Toys
Management System Certification:
ISO 9001, ISO 9000
Company Introduction:
Shenzhen Ruida Fei Technology Co., Ltd...Is committed to providing long-term Drone/UAV and Auto Parts. Our products are widely used in Germany, Japan, France, the United States, moderate multinational variety of cars.
After many consumers use by all walks of life under the same conditions with feedback information, supply the factory in technology continue to improve, so that the quality increasing, gradually improved.
"Innovation" as its mission, ICP trade adhering to the "quality first, customers first, service first" philosophy, through first-class products and services to create greater value for our customers, hand in hand, a better tomorrow.
){kind=link}